Gates & Fittings

GRAVITY-FED GATE LATCH

Whites 2-Way Gate Latch is a clever way to secure round-pipe gates. As the gate closes it lifts the latch and rests between the latches. The latch can secure the gate from both sides.

To install, the latch can be screwed or welded onto posts and is suitable for common 25NB pipe gates.

GATE BOW LATCH

Whites Gate Bow Latch is an easy-to-use gate fitting that can be screwed or welded into place. suits 25NB gates.

For installation: ensure that you use screws that are suitable for the type of post, Gate Bow Latch can also be welded on steel posts.

To use: simply lift off the latch, drop-on to the gate and secure the latch.

Handy Hints:

• Use with Whites Strap & Hinge Set Gate Fittings.

Note: Available at Bunnings only.

GATE PIN

Whites Gate Pin is a strong and sturdy screw-in M20 threaded gudgeon for 25NB gates. It is suitable for steel and timber posts and is compatible with Gate Strap Hinge.
It measures 350mm in length and includes 2 nuts and 2 washers.

Note: Available in Victoria only.

GATE STRAP HINGE

Whites Gate Strap Hinge is a strong and sturdy for support for timber gates. It measures 300mm in length and is made from zinc-plated steel.

Note: Available in Victoria only.

HEAVY DUTY

Whites Heavy Duty Staples come in a pack of 6 staples that is ideal for attaching chains and pins to timber posts. Designed for timber posts, the staples are simply hammered into place to secure.

Note: Available in Victoria only.

RING LATCH SET

Whites Ring Latch Set includes the catch, ring latch and chain for locking gates.

For installation, ensure that you use screws that are suitable for the type of post, Ring Latch & Catch can also be welded on steel posts.

• With the gate in closed position, place the catch on inside face of the post as shown below. Mark holes pre-drill and fix.
• Pass chain through gate and position chain latch plate allowing for slack. Mark holes pre-drill and fix.

Handy Hints:

• Use with Whites Strap & Hinge Set Gate Fittings.

Note: Available at Bunnings only.

SCREW-IN DROP LATCH

Whites Screw-in Drop Latch gate fitting is a traditional and convenient way to secure large and small gates. Simply thread the chain through the gate and drop the latch pin into the catch to secure. Featuring a screw-in 12mm latch and catch with chain. Also available in Ring Latch style.

SCREW-IN GUDGEON

Whites Screw-In Gudgeon is a bottom ‘hinge’ for a round-pipe gate. Suitable for 25NB medium to large size gates, the gudgeon mounts into timber posts.

Note: Available in Victoria only.

SCREW-IN RING LATCH

Whites Screw-in Ring Latch is a traditional and convenient way to lock large and small gates. Simply thread the chain through the gate and place the ring latch pin around the catch to secure. Featuring a screw-in 12mm latch and catch with chain. Also available in Drop Latch style.

BOLT LATCH WITH SPRING

Whites Spring Latch is a 12mm bolt latch with spring that can be screwed-in or welded-on. Suitable for gates, cages and box trailers, the latch pulls back to open and then springs back into place when you want to secure the gate or door.

TOP AND BOTTOM TUBULAR GATE HINGES

Whites Tubular Gate Hinges are screw-in hinge set designed to fit square tube (25mm x 25mm) and rectangular tube (25mm x 38mm) posts. Featuring a top hinge, and an adjustable bottom hinge (screws are not included).

Note: Available in Victoria only.

WELD-ON HINGES

Whites Weld-On Hinges are a slide-on/lift-off hinge designed to be welded onto steel gates and posts. The pack is supplied as complete gate hinge set, including 2 hinges and 2 locking pins. Available in two sizes, 12mm and 16mm.

Note: 16mm is currently only available in Victoria.

PIPE SADDLES

Whites Pipe Saddles are a Hot-dip Galvanised saddles ideal for common sizes of gates and pipe fittings. Available in three sizes: 25NB, 32NB, 40NB.